McDATA Sphereon 4500 Manual de usuario descargar pdf (Pagina 69)

Hardware View

2-13

Monitoring and Managing the Switch

• Operating Mode. Always in Open System Mode.

• Preferred Domain ID as set through the Configure Operating

Parameters dialog box.

• Active Domain ID. The actual domain ID assigned to the switch.

• Fibre Channel Address Domain.

• CTP State.

• Switch Speed. This is always set to 2 Gb/sec.

• Switch Binding. Enabled if the optional SANtegrity features are

installed and enabled. Otherwise, disabled displays.

Using Menu Options

Right-click on various parts of the Hardware View to display menu

options for displaying status and information and for controlling the

switch and various hardware components.

Switch Menu Right-click on any area of the switch illustration where a hardware

component is not installed to display the following menu options.

Switch Properties

Click to display the Switch Properties dialog box. This dialog box

contains the switch name, description, location, and contact person

configured through the Configure Identification dialog box. Also

included is other product information as detailed in

Displaying Switch

Information on page 2-12. You can also display this dialog box by

double-clicking an area on the illustration away from a hardware

component.

Enable Unit Beaconing

Click the check box to toggle unit beaconing on or off. When the

check box has a check mark, unit beaconing is on, and the system

error light (ERR) on the switch blinks to help users locate the unit

managed by the Product Manager. The amber indicator on the

Hardware View also blinks when beaconing is enabled. When you

click the check box to remove the check mark, the unit beaconing is

disabled.

You can only enable beaconing if there are no system errors (the system error

light is off).

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 215 216

Sin comentarios

McDATA Sphereon 4500 Manual de usuario Pagina 69