McDATA ULTRANETTM EDGE STORAGE ROUTER 3000 Especificaciones descargar pdf (Pagina 37)

Fibre Channel Switch Requirements

PID Format Settings

2-21

PID Format Settings

The required PID format settings for the Brocade Fibre Channel switches are determined by the

series/model of the Brocade switch and the firmware level used.

Note: The PID format settings should be consistent throughout the fabric.

Table 2-9 provides the required PID format settings for Brocade 2000 series/models. For all other

Brocade series/models, the PID format settings can be either 0 or 1, as long as they are consistent

throughout the fabric.

Table 2-9 Required PID Format Settings Based on Brocade Series/Model

Brocade Series With RSL Without RSL

Brocade 2000 Series

Includes:

• Silkworm 2050

• Silkworm 2400

• Silkworm 2800

• PID = 0 or 1 • PID = 0

Note:

Firmware 2.6.2a recommended

Note: Brocade 2000 series without RSL is not compatible with Brocade models 3900, 12000,

24000, and 4100. These models only support PID=1, which is not supported by Brocade 2000 series

without RSL.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 55 56

Sin comentarios

McDATA ULTRANETTM EDGE STORAGE ROUTER 3000 Especificaciones Pagina 37