McDATA 4416 Guía de instalación descargar pdf (Pagina 9)

McDATA 4416 Switch Module Release Notes Firmware Version 5.2.3.13.00 GUI Version 5.02.3.07 P/N

Other Notes and Considerations

• When using McDATA Embedded Web Server or Element

Manager, the faceplate Device tab for a non-McDATA 4416 switch

will show Unknown for three columns. It is normal for the Switch,

Port and Target/Initiator columns on non-McDATA 4416

switches to show Unknown.

CAUTION

Configuration Wizard should be applied to an isolated switch -

links to other switches should be disconnected before continuing.

If the switch is part of a fabric, the Wizard's operation will be

disruptive to that fabric and may result in the deactivation of the

fabric's active zone set.

• The online help states:

The Default Zone setting is set automatically on all switches in the

fabric if the Interop Mode setting on the Advanced Switch Properties

window is set to McDATA Fabric Mode. If set to Standard, you must

ensure that all switches in the fabric have the same Default Zone setting.

The correct statement is:

If the switch is in McDATA fabric mode and you change the Default

Zone setting, the new setting is propagated to all switches in the fabric.

If the switch is in Standard mode and you change the Default Zone

setting, the new setting is NOT propagated to any other switches in the

fabric.

• To use the McDATA SANtegrity Enhanced feature, you must

install the McDATA SANtegrity Enhanced PFE key and enable

the Secure Socket Layer (SSL) feature in McDATA Embedded

Web Server. When the PFE key is installed and SSL is enabled, the

Security menu becomes available in Element Manager.

• If you enable SSL using the GUI on the entry switch, secure

communication between the management station and the switch

will not be used until you add a new fabric using the IP address

of the switch where you enabled SSL. You will know that secure

communication is being used by the addition of the padlock to

the fabric name in the fabric tree.

1 2 3 4 5 6 7 8 9 10 11 12

Sin comentarios

McDATA 4416 Guía de instalación Pagina 9