McDATA Eclipse 2640 SAN Información técnica Pagina 42

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 276
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 41
2
2-18
Eclipse™ 2640 SAN Router Administration and Configuration Manual
Configuring IP Addresses
Figure 2-7 FC/Ethernet Port Configuration Dialog Box
The Next Hop Gateway IP Address
The iFCP/iSCSI ports interact with the external IP network as if they
were independent IP hosts. Each iFCP/iSCSI port needs a gateway
address of an external router that can forward the storage traffic to
the remote iFCP/iSCSI port. This Next Hop Gateway Address is the
first-hop gateway address. If the IP address of the remote iFCP/iSCSI
port is in a different subnet from the local iFCP/iSCSI port, then you
must configure the Next Hop Gateway Address. If the remote
iFCP/iSCSI port is on the same subnet as the local iFCP/iSCSI port,
then the Next Hop Gateway Address field is not used and does not need
to be configured.
Vista de pagina 41
1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 275 276

Comentarios a estos manuales

Sin comentarios