McDATA Eclipse 2640 SAN Información técnica Pagina 75
- Pagina / 276
- Tabla de contenidos
- SOLUCIÓN DE PROBLEMAS
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
3
Configuring RADs and mSAN Connections
3-11
Example Configuration and Procedures
Example Configuration and Procedures
This section provides a specific example of procedures to configure a
SAN Router for a RAD, as well as an mSAN consisting of an Fibre
Channel switch and attached storage (
Figure 3-4).
Figure 3-4 Connecting to Fabric and FC Device
The configuration in Figure 3-4 on page 3-11 shows both the SAN
Router and the Fibre Channel switch with no pre-configured zones.
Port 4 of a SAN Router will be connected to a port on the Fibre
Channel switch. The FC server is connected to port 3. The FC WWN
of the HBA in the server is 0x10000000C9232E47. There is a JBOD
connected to the FC switch, which has six disks with WWNs as
shown in the figure. This section describes this sample configuration
using R_Ports.
To create the port configuration, follow these instructions:
1. Make sure the SAN Router is not connected to the FC switch.
2. Start the Element Manager for that SAN Router to configure an
R_Port.
- 2640 SAN Router 1
- Revision Date Description 2
- Contents 3
- Chapter 8 Troubleshooting 6
- Figures 9
- Tab le s 11
- Overview 19
- SAN Router Features 22
- Scalability Metrics 23
- SAN Router Layout 24
- Configuring System 25
- Configuring the SAN Router 26
- Configuring System Basics 27
- Using the Element Manager 29
- Element Manager Overview 30
- Starting the Element Manager 31
- Element Manager window 33
- Getting Help 35
- Keyboard Shortcuts 35
- Getting Write Permission 35
- Settings\<login-name> 37
- Configuring IP Addresses 39
- The Router Inband IP Address 41
- The Internal IP Address 43
- • SNMP Protocol (161) 46
- • SNMP Traps (162) 46
- Configuring System Operations 47
- System Properties Dialog Box 48
- Login Banner 49
- Procedure 50
- Date/Time Dialog Box 51
- Configuring SNMP 54
- Configuring Trap Recipients 57
- Tra ps dialog box ( 57
- Figure 2-15 on page 2-34) 57
- SNMP Traps Dialog Box 58
- Configuring mSNS 59
- Configuring New Device Zoning 59
- Static Routes 60
- Configuring RADs and 65
- Configuring R_Ports for mSANs 70
- Table 3-1 R_Port Parameters 72
- R_port Compatibility 78
- Configuring iSAN 79
- Setting the iFCP Parameters 87
- Configuring iFCP Connections 92
- Remote Connections Dialog Box 93
- Table 4-2 96
- Configuring iSAN Connections 101
- MAN/WAN Links 102
- Automatic Communication 103
- Configuring iSCSI 109
- Connections 109
- Introduction 110
- Example Configuration 111
- Configuring iSCSI Ports 112
- Configuring iSCSI Connections 113
- Advanced TCP Configuration 114
- Setting the iSCSI parameters 117
- Configuring iSCSI Devices 121
- Adding iSCSI Devices Manually 122
- Zoning iSCSI Devices 127
- Computer Management Window 132
- Using Static Routes 135
- Using RADIUS Authentication 136
- Add Target Portal Dialog Box 138
- Table 5-1 Static Route 146
- Add Static Route Dialog Box 147
- Monitoring SAN Router 149
- Operation and 149
- Device View 150
- Table 6-1 Port LED Colors 151
- FC Port Tool Tip 153
- FC R_Port Tool Tip 153
- System Information 154
- Table 6-3 System Status LEDs 155
- Performance Bar Tool Tip 156
- System Temperature Tool Tip 157
- Power Supply Tool Tip 157
- Fan Tool Tip 158
- Message Log 158
- Setting the Polling Interval 159
- Using the System Log 160
- Viewing Statistics 162
- Table 6-6 163
- Fibre Channel/Port Statistics 166
- Figure 6-16) 168
- Port Traffic Statistics 169
- Port Traffic Report 170
- Chart Options Dialog Box 171
- MAC Forwarding 174
- MAC Forward Table Dialog Box 175
- IP Forwarding 176
- Table 6-10 IP Forwarding 177
- ARP Table Dialog Box 178
- Table 6-11 ARP Table 179
- Remote Connection Statistics 181
- Configuration, Firmware 187
- Maintenance 187
- Upgrading Firmware (E/OSi) 188
- Upgrading bootrom (E/OSi) 191
- Resetting the System 192
- Delete the System Log 201
- Troubleshooting 203
- SAN Router Troubleshooting 207
- Glossary 211
- NUMERICS 212
Relacionado con productos y manuales para Redes McDATA Eclipse 2640 SAN
Redes McDATA Eclipse 2640 SAN Manual de usuario
(26 paginas)
(26 paginas)
Redes McDATA Eclipse 2640 SAN Manual de servicio
(102 paginas)
(102 paginas)
(4 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.161 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales