McDATA 1U Server Manual de servicio descargar pdf (Pagina 114)

2-72

McDATA Sphereon 4400 Fabric Switch Installation and Service Manual

Installation Tasks

13. Select Enable E-Mail Notification from the Maintenance menu at any

view. A check mark appears to indicate e-mail notification for the

product is enabled.

NOTE: The enable function must be activated for each product through

the Element Manager application.

Configure and

Enable Ethernet

Events

Perform this procedure to configure and enable Ethernet events. An

Ethernet event is recorded (after a user-specified time interval) when

the switch-to-management server communication link drops.

To configure and enable Ethernet events, use the following steps:

1. Select Ethernet Event from the Monitor menu in the EFCM main

window. The Configure Ethernet Events dialog box appears..

2. Enable the Enable Ethernet Events check box. .

3. Type a value between 10 - 120 minutes in the Ethernet Timeout

field.

4. Click OK to close the dialog box.

Configure, Enable,

and Test Call-Home

Event Notification

Telephone numbers and other information for the call-home feature

are configured through the Windows dial-up networking

application. Refer to Task 11: Configure the Call-Home Feature (Optional)

for configuration instructions.

To configure, enable, and test call-home event notification, use the

following steps:

NOTE: The call-home feature may not be available if the EFCM Lite

application is installed on a customer-supplied platform.

1. Select Call Home from the Monitor menu (Monitor>Event

Notification>Call Home) in the EFCM main window. The Call Home

Event Notification Setup dialog box appears..

2. Enable the Enable Call Home Event Notification check box.

NOTE: The enable function must be activated for each product through

the Element Manager application.

3. Click Send Test. A call-home test message is sent.

1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 315 316

Sin comentarios

McDATA 1U Server Manual de servicio Pagina 114