McDATA OPENconnectors Command Line Interace Manual de usuario descargar pdf (Pagina 118)

2-74

Enterprise Operating System Command Line Interface User Manual

config

Parameters This command has one parameter.

Command Example

Root> config switch insistDomainId 1

NOTE: The Insistent Domain ID must be enabled, if the Enterprise Fabric

Mode (an optional SANtegrity feature) or Preferred Path is enabled.

config.switch.interopMode

Syntax interopMode interopMode

Purpose This command sets the interoperability mode for the switch. The

switch must be offline to complete this command.

NOTE: The switch must be set offline before this command is entered.

Parameters This command has one parameter.

Command Example

Root> config switch interopMode open

config.switch.ltdFabRSCN

Syntax ltdFabRSCN ltdFabRSCNState

insistentDomainIdState Specifies whether the insistent domain ID

state is enabled. Valid values are enable and

disable. Boolean 1 and 0 may be substituted

as values.

interopMode Specifies the interoperability mode. Valid

values are mcdata and open:

mcdata — McDATA Fabric 1.0. Select this mode

if the fabric contains only McDATA switches

and directors that are also operating in

McDATA Fabric 1.0 mode.

open — Open Fabric 1.0. Select this mode if the

fabric contains McDATA switches and directors

and other open-fabric compliant switches.

Select this mode for managing heterogeneous

fabrics.

1 2 ... 113 114 115 116 117 118 119 120 121 122 123 ... 327 328

Sin comentarios

McDATA OPENconnectors Command Line Interace Manual de usuario Pagina 118