McDATA OPENconnectors Command Line Interace Manual de usuario descargar pdf (Pagina 54)

2-10

Enterprise Operating System Command Line Interface User Manual

config

Output Example The output from the config.features.show command displays as

follows.

Installed Feature Set Feature State

------------------------------ ------------------ -----

Flex Ports 8 Flex Ports Enabled

SANtegrity Fabric Binding Active

SANtegrity Switch Binding Enabled

SANtegrity Enterprise Fabrics Active

Open Trunking Open Trunking Enabled

NOTE: The command show.features on page 2-150.has functionality that is

identical to this command.

config.fencing.addPolicy

Syntax addPolicy name

Purpose This command configures a new fencing policy and assigns it a name.

The new policy is assigned default settings, which must be changed

before the policy is activated.

See config.fencing.setParams on page 2-12 for default settings.

Parameters This command has one parameter.

Command Example

Root> config fencing addPolicy Policy2

NOTE: The maximum number of policies supported is 14.

config.fencing.addPort

Syntax addPort name portNumber

Purpose This command adds a port to the specified fencing policy.

name Specifies the name of the new fencing

policy. This name can consist of any

printable USASCII characters up to a

maximum length of 63 characters. This

name is case-sensitive.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 327 328

Sin comentarios

McDATA OPENconnectors Command Line Interace Manual de usuario Pagina 54